Eramet Norway<\/a>\u00a0is among the best companies in its sector with a carbon footprint that is less than 40% of the average.<\/p>\nAt the end of March 2023, Eramet Norway was rewarded for its efforts in this area by Enova with a \u20ac12 million (NOK 132 million) grant supporting two projects to optimize its energy consumption and minimize its CO2<\/sub>\u00a0emissions.<\/p>\nRecovering, transforming, storing<\/h2>\n
The gas emitted by the pyrometallurgical furnaces of the Sauda plant, which are today in majority flared, generate CO2<\/sub>. The gas also represents a potential source of energy which is currently unused.<\/p>\nTo reduce the impact on the climate and optimize its energy consumption, Eramet Norway has been testing a gas engine since 2021, which uses furnace gas to produce electrical and thermal energy. The next step is to install six additional engines to recover as much energy as possible. This full-scale energy recovery unit (ERU) will provide more than 12 MW of power, corresponding to more than 90 GWh per year of electrical energy and about 150 GWh per year of thermal energy.<\/p>\n
As for the CO2<\/sub>\u00a0present in these gases, Eramet Norway is planning to build a testing pilot that will optimize the performance of the carbon capture process within the metallurgical field. This pilot will also serve to develop a full-scale capture plant which is to be commissioned in 2028. The CO2<\/sub>\u00a0captured at the Sauda plant will then be safely transported and permanently stored under the sea bed, in a process known as Carbon Capture and Storage (CCS).<\/p>\nIn the future, these two innovative initiatives could be replicated in the Group’s other manganese alloy plants in Norway, Gabon, France and the United States, thereby helping to reduce Eramet’s greenhouse gas emissions and, why not, benefit other players in the sector.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
\nWe will lead the way in our industry and be the first producer to reach the Net zero emission goal. Going first involves risk, and to succeed we depend on risk relief. Enova’s commitment gives us this, and at the same time the decision demonstrates the Norwegian authorities’ willingness to further develop the Norwegian process industry. This is an important signal to us as a global player.<\/p>\n<\/blockquote>\n
Bj\u00f8rn Kolbj\u00f8rnsen<\/strong>
\nChairman of the Board of Eramet Norway and Director of Eramet’s manganese alloy activity<\/p>\n<\/div><\/div><\/div>\nThese two projects at Eramet Norway Sauda are very promising in terms of the transformation we are facing. They will provide a better utilization of the energy in the furnace gas and a significantly reduced power out-take. The pilot plant will contribute to reducing the risk and costs of future carbon capture plants. Enova supports those who are at the forefront of efforts to reduce emissions and have an efficient energy system. By carrying out these two exemplary projects, Eramet sets a new standard for climate and energy efforts going forward.<\/p>\n<\/blockquote>\n
Nils Kristian Nakstad<\/strong>
\nCEO of Enova<\/p>\n<\/div><\/div><\/div>\nWe need industrial companies that take bold steps to reduce CO2 emissions and use energy more efficiently. Eramet Norway Sauda’s plans for increased utilisation of excess heat and piloting of carbon capture are precisely an example of this. All credit to Eramet Norway who takes the initiative and leads the way in the transition to a low-emission society.<\/p>\n<\/blockquote>\n
Espen Barth Eide<\/strong>
\nThe Norwegian Minister of Climate and Environment<\/p>\n<\/div><\/div><\/div><\/div><\/div>